Unilock Roofing Nationwide

Unilock Roofing: The Long Beach Owner’s Guide

Unilock roofing components in Long Beach typically run $400-$1,800 for repair and $8,000-$20,000 for full replacement, depending on whether we’re matching existing pavers, coping, or membrane integration on your roof deck or terrace system. We stock Unilock-compatible coping units, pedestal pavers, and drainage components for same-day installation on most Belmont Shore, Naples, and Bixby Knolls calls. Most Long Beach homeowners discover a Unilock roofing issue after heavy rain, when water pools on a terrace that used to drain clean, or when a paver lifts and the membrane beneath shows daylight.

Call (424) 567-7009

Which Unilock Models This Applies To

Unilock’s roofing-adjacent systems fall into three categories we service in Long Beach: pedestal-set pavers on commercial and residential roof decks, permeable pavers integrated with drainage assemblies, and wall coping or cap units that terminate at roof edges. The current series include Beacon Hill Flagstone, Bristol Valley, and Richcliff for pedestrian-rated roof decks, plus the Umbriano line when specified for architectural terraces. To identify your exact unit, flip a loose paver - the production stamp on the underside shows the series, color batch, and manufacturing date within a four-week window. This matters because Unilock reformulated its color matrix in 2019, so a 2017 Richcliff in “Summer Wheat” will not match a 2023 unit of the same name.

We source OEM Unilock units direct from the Ontario, CA distribution center for color-critical repairs, and we keep generic pedestal components and 2mm-6mm spacer tabs on the truck. For functional-only repairs where color match is secondary, we specify equivalent-grade pavers from Belgard or Techo-Bloc that meet the same ASTM C902 pedestrian traffic rating. The OEM-versus-aftermarket decision usually comes down to visibility: a front terrace in Bluff Park gets the Unilock original; a rear service deck in the Zaferia district gets the equivalent spec at lower unit cost. We put both options in the written quote, with the price difference stated line by line.

Signs Your Unilock Roofing Is Failing

• Standing water on pavers that used to drain within an hour. This usually means the pedestal system’s self-leveling heads have seized or the substrate slope has shifted. In Long Beach, the marine layer accelerates corrosion on galvanized pedestal hardware, and we see seized adjusters on decks within five blocks of the water more often than inland.
• Pavers rocking or sounding hollow when stepped on. A pedestal has failed or the spacer tab has cracked. The paver itself is likely intact, but the support grid beneath needs inspection. Walking on a rocking pafer stresses the corners, and corner chips are the most common secondary damage we document.
• Water staining on the ceiling below a roof terrace. The membrane beneath the paver system has compromised at a penetration, edge detail, or seam. Unilock pavers are not the waterproofing; they protect the membrane from UV and foot traffic. The actual leak is almost always in the subsurface assembly.
• Efflorescence blooming between paver joints. White mineral deposits indicate moisture is migrating upward through the bedding layer, either from a failed drainage mat or from irrigation overspray hitting the deck edge. Long Beach’s hard water makes this especially visible on darker Unilock colors.
• Coping stones separating from the wall or tilting outward. The mortar bed or adhesive has lost bond, often from thermal cycling where south-facing walls see 40-degree daily swings. On older Long Beach homes near the port, we also find this accelerated by salt air corrosion of embedded wall ties.

Before

After

Replacement Cost & What’s Included

The range depends on three factors: access (a third-story walk-up in Alamitos Beach costs more than ground-level in Los Altos), whether we can source the original color batch, and what the substrate reveals when we lift the first paver. We do not quote until we have seen the deck. Under Clause 1 of the Haven Standard, the written price covers everything in the scope; if we find rot in the substrate, we stop, photograph it, and present a signed change order before any additional work proceeds. That discipline is why our projects finish within a few percent of the agreed number.

DIY or Call Us?

There is one thing a homeowner can safely check: lift a corner paver with a suction cup or flat pry bar, wearing gloves, and photograph what you see. If the membrane below is intact, dark, and slightly textured, the issue is likely pedestal-level. If you see cracks, thin spots, or standing water on the membrane itself, stop there.

Do not attempt to reset pedestals or replace membrane sections yourself. Roof deck assemblies are live loads rated by an engineer; changing the pedestal height or spacing alters load distribution. Membrane work requires heat-welding or adhesive application that voids manufacturer warranties when done without certification. And any work above ground floor requires fall protection that most homeowners do not keep on hand. We carry the liability coverage, the manufacturer certifications, and the documented photo record that protects both parties. Call (424) 567-7009 to schedule your free estimate - we will inspect, photograph, and quote in writing before any work starts.

FAQs