Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterHow Much Does Bathroom Vanity Installation Cost in Long Beach?
Bathroom vanity installation in Long Beach, CA typically costs $800 to $3,000, with most homeowners landing between $1,100 and $2,200 depending on vanity size, plumbing complexity, and whether the existing setup needs modification. That range covers labor and a mid-grade vanity unit; high-end stone tops, double-sink configurations, or older homes with outdated supply lines push the number higher.
Below is every cost factor broken down in plain numbers, so you can screenshot this page and compare it against any other quote you receive. If you’d like a written price specific to your bathroom before any work starts, that’s exactly what Rowan Construction Group delivers on every job.
Bathroom Vanity Installation Cost Breakdown (2026)
The $800-$3,000 range covers a wide span of project types. Here’s how those dollars are typically distributed across a standard Long Beach installation:
| Cost Item | Typical Range (Long Beach, 2026) | Notes |
|---|---|---|
| Vanity unit (single sink, 30-36 in.) | $300-$900 | Stock vanities from brands like Kohler or mid-tier lines; custom cabinetry billed separately |
| Vanity unit (double sink, 60-72 in.) | $600-$1,800 | Size and finish drive price; frameless vs. framed door style adds $100-$300 |
| Countertop / integrated top | $150-$600 | Cultured marble and ceramic are lowest; engineered stone (Caesarstone, Cambria) costs more |
| Faucet and drain hardware | $80-$350 | Kohler and Toto fixtures are mid-to-upper range; basic builder-grade starts around $80 |
| Labor – removal and disposal | $100-$250 | Includes safe disconnection of supply lines and P-trap; older galvanized lines add time |
| Labor – installation | $200-$500 | Straightforward swap; anchoring to wall studs, leveling, caulking, reconnecting plumbing |
| Plumbing modifications (if needed) | $150-$450 | Common in Long Beach homes built before 1975 – supply line relocation or shut-off valve replacement |
| Electrical (lighting, GFCI outlet) | $100-$300 | Required if vanity lighting is being repositioned or a new GFCI outlet is added |
| Drywall / tile repair behind vanity | $100-$350 | Nearly always needed when upsizing a vanity footprint |
| Total – typical project | $800-$3,000 | Materials + labor combined; complex plumbing or custom stone tops can exceed this |
A straightforward like-for-like replacement in a post-1990 Long Beach condo – same footprint, new vanity unit, existing plumbing in good shape – usually comes in at the lower end of that range, around $800 to $1,200. A primary bath upgrade in a Craftsman bungalow in Bixby Knolls, where supply lines are older and the wall cavity needs new blocking for a heavier double vanity, reliably lands in the $1,800 to $2,600 territory. Projects that include a Caesarstone or Cambria top, or a semi-custom cabinet with full-extension drawers and soft-close hinges, can reach the upper boundary.
One number that often surprises Long Beach homeowners: tile repair. When you remove a vanity that was installed before the surrounding tile, there’s frequently a stripe of unpainted drywall or broken grout behind it. Patching and matching that area is not glamorous work, but skipping it leaves visible damage. We include it in the written scope so the quote you receive is the full number, not the starting number.
What Affects Bathroom Vanity Installation Pricing in Long Beach
- Vanity size and configuration. A 24-inch single-sink vanity in a Belmont Shore condo powder room is a different job than a 72-inch double-sink unit going into a primary bath in El Dorado Park. Every additional inch of width adds material cost and installation time, and double sinks mean two sets of supply connections, two drains, and a longer countertop to seal and support.
- Age and condition of the existing plumbing. Long Beach has a substantial stock of homes built in the 1940s through 1970s, particularly in neighborhoods like California Heights, Wrigley, and North Long Beach. Galvanized steel supply lines from that era are often corroded at the threads by the time you reach them. Replacing a shut-off valve or re-routing a supply line adds $150 to $300 to a job that would otherwise be a simple swap. A crew that doesn’t flag this in writing before starting is one that hands you a surprise invoice later.
- Countertop material. An integrated cultured marble top that ships with the vanity unit is the lowest-cost path. A separate engineered stone top – Caesarstone or Cambria are our most-requested – adds $200 to $500 over a standard top and requires precise templating and cutting. The finished result holds up better to Long Beach’s humidity and the salt air that drifts inland from the shoreline in Belmont Shore and Naples.
- Whether the footprint is changing. Keeping the new vanity the same width as the old one is the clearest path to a lower bill. Going wider means new blocking in the wall, possible tile or drywall repair, and sometimes relocating the drain rough-in. Going narrower leaves a gap that needs to be patched and painted. Both are manageable; both add cost and should be in the written scope before the job starts.
- Lighting and electrical work. Many Long Beach bathrooms have a single light bar centered over the vanity. Swapping to a 60-inch vanity when the light bar is centered for a 30-inch unit means either new electrical work or an off-center fixture. A GFCI outlet that isn’t present (required by California code within 36 inches of a sink) also needs to be added. These are not optional items – they’re code compliance in Los Angeles County.
- Fixture grade. The faucet is the detail people notice. A Kohler single-hole faucet in a brushed nickel finish runs $120 to $250 for the fixture alone. A Toto sensor faucet or a high-arc vessel faucet for a drop-in bowl can reach $350. Builder-grade works; it just doesn’t look the same in five years. The written quote names the brand and model so there’s no ambiguity about what you’re getting.
Before
AfterHow to Save on Bathroom Vanity Installation in Long Beach
There are real ways to reduce cost on this project, and there are false economies that create more expense later. Here’s a plain account of both.
Choose a stock vanity over a semi-custom or custom unit
Stock vanities from Kohler, James Martin, or the mid-tier lines available through regional suppliers come in standard widths and ship pre-assembled or flat-pack ready to assemble. They’re designed to drop into a standard rough-in, which keeps labor time predictable. A custom cabinet built to an odd dimension costs two to four times more in material and requires a longer lead time. Unless your bathroom has an unusual configuration that forces a custom solution, stock is a sound choice.
Keep the footprint the same
If your existing vanity is 36 inches wide and positioned against the same wall with the same plumbing rough-in, replacing it with another 36-inch unit eliminates a category of cost entirely. No tile repair, no new blocking, no drain relocation. In Long Beach tract homes in areas like Lakewood Village and Carson Park, where bathroom layouts were standardized during construction in the 1950s and 60s, this is usually straightforward.
Supply your own fixtures if you’ve already priced them
Rowan sources fixtures at trade pricing, and the written quote reflects that. But if you’ve found a specific Kohler or Toto faucet at a price you want to use, bring that to the estimate conversation. We’ll build the scope around your fixture and adjust the line items accordingly. What we won’t do is install a fixture we can’t stand behind from a quality standpoint – that’s a conversation we’ll have upfront.
Get a second opinion on any written estimate you already have
Under Rowan’s standing Free Second Opinion offer, Grant Rowan will review any written competitor estimate line by line at no charge. If a quote you’ve received has a plumbing line item that seems high, or doesn’t break out labor from materials at all, bring it in. The offer is there because we’re confident in our numbers and because vague quotes in this trade almost always resolve in the contractor’s favor, not yours.
Bundle vanity work into a broader bathroom remodel if the timing is right
A full Bathroom Vanity Installation in Long Beach project is efficient on its own, but if your bathroom floor tile is also due for replacement or your shower enclosure needs attention, combining the work into a single mobilization saves on setup, disposal, and crew time. A small bathroom remodel in Long Beach runs $5,000 to $12,000 and typically includes the vanity as part of the scope. The math sometimes favors doing more at once.
For an exact written price on your bathroom in Long Beach, call (424) 567-7009. Estimates are free, and the price you receive is flat and in writing before anyone picks up a tool – that’s not a process step, it’s the basis of every project we take on.
FAQs: Bathroom Vanity Installation Cost in Long Beach
How much does bathroom vanity installation cost in Long Beach, CA?
Bathroom vanity installation in Long Beach costs $800 to $3,000 for most residential projects, with the majority of single-sink replacements landing between $1,000 and $1,800 when materials and labor are combined. Double-sink configurations with stone countertops and upgraded fixtures push toward the upper end of that range. Call (424) 567-7009 for a written price specific to your bathroom – estimates are free.
How long does it take to install a bathroom vanity?
A straightforward vanity swap in a Long Beach home typically takes four to six hours for a single-sink unit in good condition. A double vanity with plumbing modifications, drywall repair, and a new stone countertop template can run two days. On day one, the old unit comes out, plumbing is inspected and modified as needed, and the new cabinet is set. Day two covers the countertop install, fixture hookup, caulking, and cleanup. The timeline is spelled out in the written scope before work begins.
Is it cheaper to repair or replace a bathroom vanity?
Replacement is usually the better financial decision when a vanity is more than 15 years old or when the cabinet box has water damage. Refinishing a vanity cabinet runs $200 to $500 in the Long Beach market, but if the substrate is compromised or the countertop is cracked, those repairs don’t address the underlying condition. A new mid-grade vanity unit starts around $300 to $600 in materials, and the labor cost to install it is similar to the labor cost to refinish it well. Bring us the existing condition and we’ll tell you what the numbers actually look like for your specific bathroom.
Do I need a permit for bathroom vanity installation in Long Beach?
A like-for-like vanity replacement – same location, same plumbing connections, no electrical changes – does not require a permit in Long Beach under the City’s standard interpretation of California building code. If the project includes relocating the drain rough-in, adding a new electrical circuit, or making structural changes to the wall cavity, a permit is required and we pull it. The written scope identifies which category your project falls into before work starts, so there’s no ambiguity on the permit question.
Can a bathroom vanity be installed in one day?
Yes, in most cases. A single-sink vanity replacement with no plumbing relocation and an integrated top is a same-day job for an experienced crew. Long Beach homes in post-1990 neighborhoods like Bixby Knolls Estates or Signal Hill typically have accessible supply lines and standard rough-in dimensions that make same-day completion reliable. Older homes in North Long Beach or historic districts sometimes reveal surprises behind the walls – corroded shut-offs, non-standard rough-ins – that extend the timeline. The documented photo record you receive at the end of the visit shows exactly what was found and what was done.
What’s included in a vanity installation quote from Rowan Construction Group?
Every written quote from Rowan includes: the vanity unit (manufacturer, model, and finish named), countertop material specified, faucet and drain hardware identified by brand and model, labor for removal and installation, plumbing reconnection, drywall or tile patching if needed, and disposal of the old unit. The price is flat. Under Clause 1 of the Haven Standard, no work proceeds until the price is in writing and the scope is agreed. If conditions discovered during the job require a change – say, a shut-off valve that needs replacement – no work on that change starts until a signed change order is in place. That’s the discipline that has kept our projects within a few percent of the agreed cost across 4,000-plus jobs since 2007.
Why Long Beach Homeowners Choose Rowan Construction Group
Grant Rowan founded this company in 2007 with one operating principle: the price is written before anyone touches anything. That sounds simple, and it is – but it’s also uncommon enough in the remodeling trade that we’ve built 4,000-plus projects on it. Every crew member is background-checked and arrives in a uniform. Every visit produces a documented photo record that you keep. And the 365-Day Done Right Promise means that if the work isn’t right, we make it right – that’s in writing on every project, not an asterisk on the contract.
For Long Beach homeowners, that matters especially because bathroom work in this city’s housing stock ranges from uncomplicated condo swaps in Belmont Shore to genuinely complex situations in the 1940s Craftsman and Spanish Colonial homes in Wrigley and California Heights, where the wall behind a vanity can reveal plumbing conditions that require real decisions. We describe what we find, we put the options in writing, and we don’t proceed until you’ve signed off. That’s the whole system.
We source fixtures and materials across a vetted network of fifty-plus brands – Kohler and Toto for fixtures, Caesarstone and Cambria for stone tops, KraftMaid and Wellborn for cabinet work when the project calls for it – so the written quote reflects honest trade pricing, not inflated retail with a contractor markup dressed up as a discount.
If you’ve already received a quote from another contractor and want a second set of eyes on it, bring it to us. The Free Second Opinion is a standing offer, and it costs you nothing. We’ll go through it line by line and tell you what we see.
Rowan Construction Group serves Long Beach across all bathroom project types – from a single vanity replacement to a full primary bath remodel. Our home page gives you the full picture of every trade we work in, and you can get a written price by calling (424) 567-7009. The estimate is free, the price is flat, and nothing starts until it’s in writing.
Key Takeaways
- Bathroom vanity installation in Long Beach costs $800 to $3,000 for most projects, with single-sink replacements typically landing at $1,000 to $1,800.
- Plumbing condition is the biggest variable in Long Beach’s older housing stock – homes built before 1975 in neighborhoods like Wrigley, North Long Beach, and California Heights often require supply line or shut-off valve work that adds $150 to $450.
- Keeping the same footprint (same vanity width, same plumbing location) is the single most reliable way to keep cost at the lower end of the range.
- Permits are not required for like-for-like replacements in Long Beach; they are required if electrical circuits or drain locations are being changed.
- Every Rowan project includes a flat written price before work starts, a signed change order for any scope change, a documented photo record, and the 365-Day Done Right Promise.
- A Free Second Opinion on any written estimate is available at no charge – call (424) 567-7009 to arrange it.
Get a Written Price for Your Long Beach Bathroom Vanity Installation
If you’re ready to replace your bathroom vanity in Long Beach and want a real number before you commit to anything, call Rowan Construction Group at (424) 567-7009. Grant Rowan and the team will schedule a free estimate, assess the existing plumbing and wall conditions, and deliver a flat written price with a fully itemized scope. No work starts until that price is in writing and you’ve agreed to it. That’s been the standard since 2007, and it’s not changing.
Pricing reflects the Long Beach market as of 2026. Rowan Construction Group Long Beach offers free estimates – call (424) 567-7009.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Long Beach since 2007.
What Our Customers Say
"They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O.