Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterHow Much Does Window Replacement Cost in Long Beach?
Window replacement in Long Beach, CA typically costs between $4,500 and $15,000 for a whole-home project, or roughly $350 to $950 per window installed, depending on window type, frame material, and glass specification. Most Long Beach homeowners replacing five to eight windows in a single-story craftsman or bungalow land in the $6,000 to $9,500 range when choosing mid-grade vinyl or fiberglass frames with dual-pane, Low-E glass. Get a written price before any work starts – under Clause 1 of the Haven Standard, Rowan Construction Group delivers a flat written quote with a written scope before a single measurement is cut.
Window Replacement Cost Breakdown (2026)
The table below reflects what Rowan Construction Group sees in the Long Beach market as of 2026. These are installed prices – labor, materials, haul-away, and basic stucco or wood-trim patching included. They do not include permit fees, which the City of Long Beach Building and Safety Bureau assesses separately (more on that below).
| Window Type / Scenario | Installed Price Range | Notes |
|---|---|---|
| Single window replacement (vinyl, double-hung) | $350 – $600 | Per opening; standard 3×4 ft size |
| Single window replacement (fiberglass, casement) | $550 – $950 | Per opening; more common in Craftsman and Spanish Revival homes |
| Whole-home replacement, 5-8 windows (vinyl) | $4,500 – $7,500 | Most common single-story scenario in Wrigley, Bixby Knolls |
| Whole-home replacement, 8-14 windows (vinyl or fiberglass) | $7,500 – $12,000 | Two-story homes, Los Altos, El Dorado Park areas |
| Impact-rated window installation (per window) | $700 – $2,200 | Coastal zones; see impact window page for full guide ($8,000-$25,000 whole-home) |
| Sliding glass door replacement (patio) | $900 – $2,500 | Often added to window projects; priced per unit |
| Bay or bow window installation | $2,200 – $5,500 | Structural considerations; permit nearly always required |
| Egress window cut-in (new opening) | $1,800 – $4,500 | Requires structural framing, stucco repair, and permit |
| Full project (10-16 windows, fiberglass, coastal spec) | $11,000 – $15,000 | Upper range; marine-grade hardware, custom sizing |
What moves a quote toward the low end: standard sizes that fit existing openings without framing changes, a home with wood or stucco exteriors in solid condition, and a frame material like vinyl (Simonton or Milgard Tuscany Series are the brands we spec most often in Long Beach) that doesn’t require custom color matching. What pushes it toward the high end: non-standard opening sizes – very common in Long Beach homes built between 1945 and 1965 in areas like Zaferia and North Long Beach – marine-grade hardware requirements for homes within a half-mile of the coast, fiberglass frames from Milgard’s Essence Series or Andersen 100, and deteriorated framing that needs repair before any new window goes in. A stucco exterior also adds about $80 to $200 per opening in patching labor versus a vinyl-sided home, because the old frame has to be carefully cut out without cracking the surrounding stucco field.
What Affects Window Replacement Pricing in Long Beach
Long Beach has a few market-specific conditions that don’t apply in inland Southern California markets. Here’s what drives the number on your written quote.
- Distance from the coast: Homes in Belmont Shore, Naples, and the Peninsula are subject to salt-air corrosion that eliminates standard aluminum hardware from the conversation entirely. Marine-grade hardware – stainless fasteners, corrosion-resistant tracks – adds $60 to $150 per window. Skip it and the hardware fails in three to five years.
- Window type and glass specification: A standard double-hung vinyl window with dual-pane, Low-E glass meets California Title 24 energy code minimums. Step up to triple-pane or a higher Solar Heat Gain Coefficient (SHGC) rating – relevant for west-facing windows in Long Beach’s afternoon sun – and the glass package alone adds $80 to $200 per unit. For homes near the 710 or the port, acoustic laminated glass is worth discussing; it adds $100 to $250 per window and makes a measurable difference in interior noise levels.
- Existing frame condition: Long Beach’s marine air is hard on wood frames. We regularly find wet rot in the sill plates of Craftsman bungalows in the Wrigley district and Spanish Revival homes in Bluff Park when we pull the old window out. Framing repair runs $150 to $600 per opening and gets documented in the photo record before new product goes in – so the customer can see exactly what was behind the old trim.
- Number of windows and project scale: Labor mobilization is a fixed cost regardless of how many windows are being replaced. A single-window swap costs more per unit than a ten-window project because setup, permitting, and haul-away are spread across more openings. If you’re on the fence about replacing three windows or five, the math almost always favors doing more in one trip.
- Permit requirements: The City of Long Beach requires a building permit for window replacements that change the opening size, add a new opening (egress cuts), or involve structural framing changes. Like-for-like replacements in the same opening generally do not require a permit under the California Residential Code, but homes in Long Beach’s historic overlay zones – parts of Carroll Park and Bluff Park, for example – may have additional review steps. Permit fees in Long Beach typically run $180 to $450 per project. We pull the permit; the customer gets a copy.
- Frame material: Vinyl (Simonton Pro-Finish, Milgard Tuscany) is the most common choice and the most cost-efficient for most Long Beach homes – durable, low-maintenance, and available in factory-matched colors. Fiberglass (Milgard Essence, Andersen 100 Series) costs 20 to 40 percent more per unit but holds paint better, handles temperature swings well, and is often the right call for homes in historic neighborhoods where the look of a painted wood sash matters. Wood-clad windows are available but rare in Long Beach coastal projects because of the maintenance demand.
Before
AfterLong Beach-Specific Considerations Worth Knowing
Long Beach’s housing stock is unusually varied for a Southern California city. You’ve got post-war tract homes in Lakewood-adjacent neighborhoods like Los Altos and Eldorado, 1920s Craftsman bungalows in Zaferia and California Heights, mid-century modern duplexes near Cal State Long Beach, and beachfront properties in Belmont Heights where the window spec conversation is entirely different than it is five miles inland.
The California Heights Historic District and parts of Bluff Park have design-review requirements that affect what window profiles and colors can be installed on street-facing elevations. That’s not a reason to avoid the project – it’s a reason to have a contractor who pulls the right permits and documents the work. Under Rowan’s standard process, the documented photo record on every visit includes the permit card, the rough inspection, and the final inspection sign-off. The homeowner keeps a copy as part of the project file.
Coastal zone setback isn’t a window-replacement factor, but the coastal climate is. Long Beach’s average relative humidity runs higher than most of the LA Basin due to the marine layer, and the salt-air environment is measurably more aggressive than Pasadena or the SGV. Dual-pane sealed units in salt-air conditions can develop seal failure (fogging between the panes) faster than the manufacturer’s stated lifespan if the wrong spacer material or sealant is used. We spec TPS (Thermo-Plastic Spacer) or stainless-steel spacer systems on all coastal installations – not the aluminum box spacer that’s standard in inland markets – because the thermal conductivity difference matters in a marine environment.
For homeowners near the Port of Long Beach or the 710 corridor, noise is often the real reason a window replacement conversation starts. A standard dual-pane unit with a 1/4-inch air gap reduces exterior noise by roughly 28 to 30 STC (Sound Transmission Class) points. A laminated acoustic glass unit – the type Milgard offers in their SoundProof series – hits 34 to 38 STC. The difference is audible in a home that’s already been quieted by good weatherstripping. It’s not a standard spec, but it’s worth pricing if noise is the driver.
How to Save on Window Replacement in Long Beach
There are real ways to reduce the total cost of a window replacement project without cutting corners on the materials that matter. Here’s what we’ve seen work over 4,000-plus projects.
- Replace all windows in one project. The labor mobilization cost – crew travel, setup, haul-away, stucco patching – is roughly the same whether you’re replacing three windows or ten. Bundling saves $150 to $300 per window in effective labor cost compared to doing windows in two or three separate trips over two years.
- Use standard-size windows where the framing allows it. Custom-sized windows are cut to order and typically cost 25 to 40 percent more than stock units. If your existing opening is close to a standard size, a framing adjustment to accept a stock window often costs less than the custom glass premium – and results in a faster lead time.
- Get a Free Second Opinion on any written estimate. Rowan offers a line-by-line review of any competitor’s written quote at no charge. This is a standing offer, not a promotion. If another contractor has quoted your project, bring the paperwork and we’ll tell you what’s priced fairly, what’s missing, and what’s inflated – in writing.
- Ask about California energy rebates. ENERGY STAR-certified windows with qualifying SHGC and U-factor ratings may be eligible for rebates through SoCalGas or SCE programs, depending on the current program cycle. The rebates are not large – typically $25 to $75 per window – but on a ten-window project they offset a meaningful portion of the glass upgrade cost. We identify qualifying product specs in the written quote.
- Don’t defer rot repair. This sounds counterintuitive as a cost-saving tip, but deferred wood rot in a window sill or rough frame compounds. A $200 sill repair caught on a 2026 replacement becomes a $900 structural framing repair if the window is left another three years. The photo record we provide after every visit documents the condition of the surrounding framing so you have a baseline for any future work.
- Time the project for late winter or early spring. Long Beach contractors, including Rowan, see lower scheduling demand in January through March compared to the summer peak. Lead times are shorter and crews have more flexibility – which sometimes means a faster project completion, not a discount, but the value is real.
For a free written estimate on your Long Beach window replacement project, call (424) 567-7009. A written price is delivered before any work starts – that’s not a process step, it’s Clause 1 of the Haven Standard.
FAQs – Window Replacement Cost in Long Beach
How much does window replacement cost in Long Beach, CA?
Window replacement in Long Beach costs between $4,500 and $15,000 for a whole-home project, or $350 to $950 per window installed. A typical Long Beach home with six to eight standard double-hung vinyl windows lands between $5,500 and $8,500 fully installed, including stucco patching and haul-away. Fiberglass frames, impact-rated glass, or non-standard opening sizes move the number higher. Call (424) 567-7009 for a written price on your specific configuration – estimates are free and delivered in writing before anything is scheduled.
Do I need a permit to replace windows in Long Beach?
Like-for-like window replacements in the same rough opening generally do not require a City of Long Beach building permit under California Residential Code Section R613. However, projects that change the opening size, add a new egress window, or affect structural framing do require a permit – and homes in Long Beach’s historic overlay zones (Carroll Park, parts of Bluff Park) may require design review even for like-for-like swaps. Permit fees in Long Beach typically run $180 to $450. Rowan pulls the permit when required; the customer receives a copy of the permit card and all inspection sign-offs as part of the documented project record.
How long does window replacement take in Long Beach?
A standard whole-home replacement of six to ten windows takes one to two days of installation time in most Long Beach homes, assuming standard-size windows and no significant framing repair. Custom-ordered windows have lead times of three to six weeks from the factory before installation begins – Milgard and Simonton are the brands we order most frequently for Long Beach projects, and their production schedules are factored into the project timeline in the written scope. Permit-required projects add a rough inspection step, which typically schedules within a few business days through Long Beach Building and Safety.
Is it cheaper to repair or replace windows in Long Beach?
Repair is cheaper in the short term – a broken sash, failed seal (fogged glass), or damaged hardware runs $150 to $500 per window to fix. But Long Beach windows that are more than 20 years old, have aluminum single-pane frames, or show wood rot in the sill framing are typically at the end of their useful life. The energy performance gap between a single-pane aluminum window and a modern dual-pane Low-E unit is significant in Long Beach’s marine climate, where cooling loads run from May through October. In most cases, repair makes sense if the window is under 15 years old and structurally sound. If the frame itself is failing or the glass is single-pane, replacement pays for itself in reduced energy costs and eliminated maintenance within seven to ten years.
What window brands does Rowan Construction Group use in Long Beach?
For vinyl windows, we most frequently spec Milgard Tuscany Series and Simonton Pro-Finish – both manufactured to California Title 24 energy standards and available in configurations suited to Long Beach’s coastal climate. For fiberglass, Milgard Essence Series and Andersen 100 Series are the standard specs, particularly in historic neighborhoods where exterior profile and paint-ability matter. For impact-rated applications in coastal zones, we source from manufacturers whose products meet AAMA 2101 standards for coastal installations. All brands and model series are named in the written quote before any work starts – so you know exactly what’s going in the wall, not what category of product we intend to use.
Can I get a second opinion on a window replacement quote I already have?
Yes – and this offer is in writing. Rowan’s Free Second Opinion on any written estimate is a standing service: bring a competitor’s quote and Grant Rowan’s team will review it line by line at no charge, identifying what’s fairly priced, what’s missing from the scope, and what’s inflated. There’s no obligation and no sales pitch attached. It’s useful because window replacement quotes vary more than most homeowners expect – the difference between a quote that includes stucco patching and haul-away and one that doesn’t is $300 to $800 in Long Beach, and it’s easy to miss in a summary-format estimate. Call (424) 567-7009 to schedule a second-opinion review.
Key Takeaways
- Window replacement in Long Beach costs $4,500 to $15,000 for a whole-home project; per-window installed cost runs $350 to $950 for standard vinyl and $550 to $950+ for fiberglass.
- Coastal location (Belmont Shore, Naples, the Peninsula) requires marine-grade hardware and may affect glass specification – budget an additional $60 to $150 per window.
- Like-for-like replacements in Long Beach generally don’t require a permit; opening changes and historic overlay zones do.
- Stucco patching, framing repair, and haul-away should be line items in any quote you receive – if they aren’t listed, ask.
- Rowan provides a written price before any work starts, a documented photo record on every visit, and a 365-Day Done Right Promise on completed work.
- A Free Second Opinion on any competitor’s written estimate is available at no charge – call (424) 567-7009.
Ready to Get a Written Price for Your Long Beach Window Replacement?
Rowan Construction Group has delivered written prices before starting work on every one of its 4,000-plus projects since 2007 – window replacements included. If you’re replacing windows in Long Beach, whether it’s a single problematic slider in Belmont Heights or a full-home re-window in Los Altos, the process is the same: a free estimate, a flat written price with a written scope, and no work scheduled until you’ve signed off on the number.
The 365-Day Done Right Promise applies to every window installation. If the work isn’t right, Rowan makes it right – that’s backed by the Haven Standard, not a handshake. And if you already have a quote from another contractor, the Free Second Opinion is there: bring the paperwork and Grant Rowan’s team reviews it line by line, free of charge.
To learn more about what the full Window Replacement in Long Beach process looks like – from the initial measurement to the final inspection photo – that page walks through the scope in detail. Or visit our home page to see the full range of trades Rowan handles across Long Beach.
Call (424) 567-7009 to schedule your free written estimate. A live person answers – not a voicemail, not a callback queue.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Long Beach since 2007.
Pricing reflects the Long Beach market as of 2026. Rowan Construction Group Long Beach offers free estimates – call (424) 567-7009.
What Our Customers Say
"Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.